BACK DOOR OUTSIDE GARNISH(w/ Tire Carrier) DISASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

   

   
   

   1. Disconnect the connector and remove the license plate light cord.

2. REMOVE REAR LICENSE LIGHT COVER

   

   
   

   1. Remove the 5 screws and rear license light cover.

3. REMOVE LUGGAGE ELECTRICAL KEY SWITCH (w/ Entry and Start System)

   Click here

4. REMOVE LICENSE PLATE LIGHT ASSEMBLY

   

   
   

   1. Remove the 4 screws and license plate light.

5. REMOVE BACK DOOR ORNAMENT

   

   Text in Illustration

   *1	Protective Tape

   
   

   1. Put protective tape around the back door ornament.

   2. Using a moulding remover, detach the 6 claws and remove the back door ornament.

      Note

      Tape the moulding remover tip before use.

6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR

   
   

   1. 

      for Rear Lower License Plate Bracket Stay:

      Remove the back door outside garnish protector.

   2. 

      for Rear License Light Cover:

      Remove the back door outside garnish protector.