ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)


    1. Remove the roof rack Click here.

  2. REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH (w/o Roof Rack)

    A01XCNNE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure to remove the roof drip side finish moulding joint cover on the other side.


    1. Put protective tape around the roof drip side finish moulding joint cover.

    2. Detach the 2 claws and remove the roof drip side finish moulding joint cover.

  3. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

    A01XF6RE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the roof drip side finish moulding.

    2. Detach the clip and remove the roof drip side finish moulding.

      Note


      • When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.

      • If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.

  4. REMOVE CENTER NO. 2 ROOF DRIP SIDE FINISH MOULDING LH

    A01XKKKE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center No. 2 roof drip side finish moulding.

    2. Remove the center No. 2 roof drip side finish moulding.

  5. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH

    A01XCDEE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center roof drip side finish moulding.

    2. Remove the center roof drip side finish moulding.

  6. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH

    A01XCL0E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the rear roof drip side finish moulding.

    2. Detach the clip and remove the rear roof drip side finish moulding.

      Note


      • When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.

      • If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.