FRONT DOOR WINDOW FRAME MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • When removing the window frame moulding, heat the vehicle body and window frame moulding using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Window Frame Moulding 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or window frame moulding excessively.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

  4. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

    Click here

  5. REMOVE ASSIST GRIP COVER LH

    Click here

  6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  7. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  8. REMOVE FRONT DOOR SERVICE HOLE COVER LH

    Click here

  9. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  11. REMOVE FRONT DOOR GLASS RUN LH

    Click here

  12. REMOVE FRONT DOOR BELT MOULDING LH

    Click here

  13. REMOVE FRONT DOOR WEATHERSTRIP LH

    B001EVO

    1. Detach the 3 clips and remove the upper part of the front door weatherstrip so that the moulding can be removed.

  14. REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING LH


    1. B001F8T

      Remove the door window frame moulding clip.

    2. B001GA6E05

      Put protective tape around the front door rear window frame moulding.

    3. Using a moulding remover, detach the clip and remove the double-sided tape to remove the front door rear window frame moulding.

      Text in Illustration
      *1 Protective Tape
      *2 Double-sided Tape
      *3 Moulding Remover