RADIATOR GRILLE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When the radiator grille is damaged or deformed due to an accident or contact with other objects, etc., or the radiator grille installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE HEADLIGHT ORNAMENT GARNISH LH (for Halogen Headlight)


    1. B001D39C01
      B001CE2 Protective Tape

      Put protective tape around the headlight ornament garnish LH.

    2. Detach the 4 clips and remove the headlight ornament garnish LH.

  3. REMOVE HEADLIGHT ORNAMENT GARNISH RH (for Halogen Headlight)

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE HEADLIGHT ORNAMENT GARNISH LH (for LED Headlight)


    1. B001HPRC02
      B001CE2 Protective Tape

      Put protective tape around the headlight ornament garnish LH.

    2. Detach the 8 clips and remove the headlight ornament garnish LH.

  5. REMOVE HEADLIGHT ORNAMENT GARNISH RH (for LED Headlight)

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE RADIATOR GRILLE


    1. B001HWZC01
      *1 Hood To Radiator Grille Seal

      Detach the 2 clips and disconnect the hood to radiator grille seal.

      Tech Tips

      Use the same procedure for the RH side.

    2. B001DNX

      Remove the 4 screws.

    3. B001D3BC01
      B001CE2 Protective Tape

      Put protective tape around the radiator grille.

    4. B001GY8

      Detach the 6 claws and remove the radiator grille.