REAR BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL ELECTRICAL KEY ANTENNA (w/ Entry and Start System)


    1. Install the electrical key antenna with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL REAR BUMPER SIDE MOUNTING BRACKET LH


    1. Connect the connector.

    2. Install the rear bumper side mounting bracket with the bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL REAR BUMPER SIDE MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. Install the No. 2 rear bumper side support with the bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  5. INSTALL REAR BUMPER BAR REINFORCEMENT LH


    1. Install the rear bumper bar reinforcement with the 3 bolts.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

  6. INSTALL REAR BUMPER BAR REINFORCEMENT RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR BUMPER END RETAINER LH (w/ Rear Bumper End Retainer)


    1. Install the rear bumper end retainer with the screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  8. INSTALL REAR BUMPER END RETAINER RH (w/ Rear Bumper End Retainer)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR BUMPER SIDE SUPPORT LH


    1. Attach the 4 claws to install the rear bumper side support.

    2. Install the 3 screws.

  10. INSTALL REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL NO. 3 REAR BUMPER SIDE SUPPORT


    1. Install the No. 3 rear bumper side support with the screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 ft.*lbf }

  12. INSTALL REAR BUMPER COVER (for 5 Door)


    1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 4 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Connect the 2 connectors.

    3. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 2 connectors.

    4. Attach the 14 claws to install the rear bumper cover.

    5. Install the 5 bolts and 2 clips.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  13. INSTALL REAR BUMPER COVER (for 3 Door)


    1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 4 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Connect the 2 connectors.

    3. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 2 connectors.

    4. Attach the 10 claws to install the rear bumper cover.

    5. Install the 5 bolts and 2 clips.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  14. INSTALL REAR QUARTER PANEL MUDGUARD LH

    Click here

  15. INSTALL REAR QUARTER PANEL MUDGUARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL NO. 1 REAR BUMPER PLATE


    1. Attach the 21 claws to install the No. 1 rear bumper plate.

    2. Install the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  17. INSTALL BACK DOOR CHECK

    Click here

  18. INSTALL REAR BUMPER BAR PLATE


    1. Attach the 14 claws to install the rear bumper bar plate.

  19. INSTALL JACK BOX HOLE COVER


    1. Attach the 2 claws to install the jack box hole cover.

  20. INSTALL PINTLE HOOK ASSEMBLY (w/ Pintle Hook)


    1. Install the pintle hook with the 4 bolts and 4 nuts.

      Torque:
      81 N*m  { 826 kgf*cm, 60 ft.*lbf }

    2. For vehicles with a spare tire installed to the underbody, install the spare tire.