REAR BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER ENERGY ABSORBER

    A01XH4LE02
    Text in Illustration
    *1 Double-sided Tape

    1. Detach the 5 double-sided tapes and remove the rear bumper energy absorber from the rear bumper cover.

  2. REMOVE NO. 5 FLOOR WIRE (w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light)

    A01XHFP

    1. Disconnect the 3 connectors.

    2. Remove the 5 clamps and No. 5 floor wire.

  3. REMOVE NO. 5 FLOOR WIRE (w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light)

    A01XKGD

    1. Disconnect the 2 connectors.

    2. Remove the 5 clamps and No. 5 floor wire.

  4. REMOVE NO. 5 FLOOR WIRE (w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light)

    A01XH98

    1. Disconnect the connector.

    2. Remove the 2 clamps and No. 5 floor wire.

  5. REMOVE NO. 4 FLOOR WIRE (w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light)

    Tech Tips

    Use the same procedure described for the No. 5 floor wire.

  6. REMOVE NO. 4 FLOOR WIRE (w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light)

    Tech Tips

    Use the same procedure described for the No. 5 floor wire.

  7. REMOVE NO. 4 FLOOR WIRE (w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light)

    Tech Tips

    Use the same procedure described for the No. 5 floor wire.

  8. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  9. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  10. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  11. REMOVE REAR BUMPER PROTECTOR SUB-ASSEMBLY LH

    A01XGTYE02
    Text in Illustration
    *1 Guide

    1. Remove the screw.

    2. Detach the guide and remove the rear bumper protector.

  12. REMOVE REAR BUMPER PROTECTOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

    Click here

  14. REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

    A01XJ45

    1. Remove the screw.

    2. Detach the 2 claws and remove the reflex reflector.

  16. REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE REAR BUMPER EXTENSION RH

    A01XGUV

    1. Remove the screw.

    2. Detach the claw and remove the rear bumper extension.

  18. REMOVE REAR BUMPER PAD (for 5 Door)

    A01XJZK

    1. Remove the 4 rear bumper pads.

  19. REMOVE REAR BUMPER PAD (for 3 Door)

    A01XFUJ

    1. Remove the 2 rear bumper pads.