REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

    B001D1W

    1. For vehicles with a spare tire installed to the underbody, remove the spare tire.

    2. Remove the 4 nuts.

    3. Remove the 4 bolts and pintle hook.

  2. REMOVE JACK BOX HOLE COVER

    B001DR9E02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the jack box hole cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE REAR BUMPER BAR PLATE


    1. Put protective tape around the rear bumper bar plate.

    2. Detach the 14 claws and remove the rear bumper bar plate.

      B001D1QE03
      Text in Illustration
      *1 Protective Tape - -

  4. REMOVE BACK DOOR CHECK

    Click here

  5. REMOVE NO. 1 REAR BUMPER PLATE


    1. Put protective tape around the No. 1 rear bumper plate.

    2. B001IG6

      Remove the 2 bolts.

    3. Detach the 21 claws and remove the No. 1 rear bumper plate.

      B001F7QE01
      Text in Illustration
      *1 Protective Tape - -

  6. REMOVE REAR QUARTER PANEL MUDGUARD LH

    Click here

  7. REMOVE REAR QUARTER PANEL MUDGUARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR BUMPER COVER (for 5 Door)


    1. Put protective tape around the rear bumper cover.

    2. Remove the 2 clips and 5 bolts.

    3. Detach the 14 claws.

    4. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Disconnect the 4 connectors.

    5. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

      Disconnect the 2 connectors.

    6. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Disconnect the 2 connectors.

    7. Remove the rear bumper cover.

      B001GCTE01
      Text in Illustration
      *1 Protective Tape - -

  9. REMOVE REAR BUMPER COVER (for 3 Door)


    1. Put protective tape around the rear bumper cover.

    2. Remove the 2 clips and 5 bolts.

    3. Detach the 10 claws.

    4. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Disconnect the 4 connectors.

    5. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

      Disconnect the 2 connectors.

    6. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Disconnect the 2 connectors.

    7. Remove the rear bumper cover.

      B001HSOE01
      Text in Illustration
      *1 Protective Tape - -

  10. REMOVE NO. 3 REAR BUMPER SIDE SUPPORT

    B001CCE

    1. Remove the screw and No. 3 rear bumper side support.

  11. REMOVE REAR BUMPER SIDE SUPPORT LH


    1. Remove the 3 screws.

    2. Using a clip remover, detach the 4 claws and remove the rear bumper side support.

      Note

      Tape the clip remover tip before use.

      B001D4FE02
      Text in Illustration
      *1 Protective Tape - -

  12. REMOVE REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE REAR BUMPER END RETAINER LH (w/ Rear Bumper End Retainer)

    B001E8L

    1. Remove the screw and rear bumper end retainer.

  14. REMOVE REAR BUMPER END RETAINER RH (w/ Rear Bumper End Retainer)

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE REAR BUMPER BAR REINFORCEMENT LH

    B001GAU

    1. Remove the 3 bolts and rear bumper bar reinforcement.

  16. REMOVE REAR BUMPER BAR REINFORCEMENT RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH

    B001GB4

    1. Remove the bolt and No. 2 rear bumper side support.

  18. REMOVE REAR BUMPER SIDE MOUNTING BRACKET LH

    B001I8N

    1. w/ Entry and Start System:

      Disconnect the connector.

    2. Remove the bolt and rear bumper side moulding bracket.

  19. REMOVE REAR BUMPER SIDE MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE ELECTRICAL KEY ANTENNA (w/ Entry and Start System)

    B001IMM

    1. Remove the bolt and electrical key antenna.