FRONT BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY LH


    1. Install the front bumper bracket sub-assembly LH with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL HEADLIGHT ASSEMBLY LH


    1. for Halogen Headlight:

      Click here

    2. for LED Headlight:

      Click here

  4. INSTALL HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL FRONT BUMPER CENTER UPPER RETAINER


    1. Install the front bumper center upper retainer with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  6. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. Attach the 2 claws to install the front bumper side support LH.

    2. Install the screw and bolt.

      Torque:
      for screw
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  7. INSTALL FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY LH


    1. Install the front bumper No. 2 extension sub-assembly LH with the 4 bolts.

      Torque:
      65 N*m  { 663 kgf*cm, 48 ft.*lbf }

  9. INSTALL FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. Install the front bumper reinforcement sub-assembly with the 6 nuts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  11. INSTALL FRONT BUMPER LOWER COVER


    1. Install the front bumper lower cover with the 5 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Install the clip.

  12. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. Install the front bumper energy absorber.

  13. INSTALL FRONT BUMPER COVER


    1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 3 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Connect the connector.

    3. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 2 connectors.

    4. w/ Headlight Cleaner System:

      Connect the No. 1 headlight cleaner hose.

    5. Attach the 16 claws to install the front bumper cover.

      Note

      Do not hold the middle of the front bumper cover, as it may become reformed.

    6. Install the 4 clips.

    7. A01XELBE02
      Text in Illustration
      *1 Screw
      *2 Bolt A
      *3 Bolt B

      Install the 2 bolts labeled A and 2 bolts labeled B.

      Torque:
      bolt B
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    8. Install the 2 screws.

    9. Install the 2 screws.

      Tech Tips

      Use the same procedure for the screws on the other side.

  14. INSTALL RADIATOR GRILLE

    Click here

  15. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  16. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here

  17. CHECK TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System)


    1. w/ Multi-display:

      Click here

    2. w/o Multi-display:

      Click here