NAME PLATE(for Rear with Tire Carrier) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.

Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, symbol emblem or back door name plate excessively.

PROCEDURE


  1. INSTALL SYMBOL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new symbol emblem.


      1. Using a heat light, heat the vehicle body and a new symbol emblem.

      2. Remove the peeling paper from the face of the symbol emblem.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate in the position shown in the illustration.

        Tech Tips

        Press the symbol emblem firmly to install it.

        A01XEEVE03
        Text in Illustration
        *a Reference Values *b Back Door Relief
        *c Back Door End Line - -

  2. INSTALL BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door name plate.


      1. Using a heat light, heat the vehicle body and a new back door name plate.

      2. Remove the peeling paper from the face of the back door name plate.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate in the position shown in the illustration.

        Tech Tips

        Press the back door name plate firmly to install it.

        A01XJUXE04
        Text in Illustration
        *a Reference Values *b Back Door Relief
        *c Back Door End Line - -