HEADLIGHT ECU REMOVAL

CAUTION / NOTICE / HINT

Note

Be sure to read Precaution thoroughly before servicing Click here.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  2. REMOVE HEADLIGHT ECU SUB-ASSEMBLY LH

    Note


    • Prevention of static electricity is required during this procedure.

    • Use static electricity countermeasures SST (desktop anti-static mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

    • If the headlight ECU sub-assembly LH has been dropped , replace it with a new one.

    • If the headlight ECU sub-assembly LH has been removed, replace the headlight gasket with a new one.

    SST
    09890-47010   ( 09891-04010, 09891-04020, 09891-04030, 09891-04040 )

    1. B001FJ5

      Remove the 3 screws and headlight ECU sub-assembly LH.

    2. B001GF4

      Disconnect the connector cover.

    3. Disconnect the 2 connectors.

  3. REMOVE HEADLIGHT GASKET

    Note


    • Prevention of static electricity is required during this procedure.

    • Use static electricity countermeasures SST (desktop anti-static mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

    • If the headlight gasket has been removed, replace it with a new one.

    SST
    09890-47010   ( 09891-04010, 09891-04020, 09891-04030, 09891-04040 )

    1. B001DKM

      Remove the headlight gasket.