AUTOMATIC HIGH BEAM MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AUTO HIGH BEAM SWITCH


    1. Attach the 2 claws to install the auto high beam switch.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  8. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here