AUTOMATIC HIGH BEAM MAIN SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE AUTO HIGH BEAM SWITCH


    1. B001GEB

      Detach the 2 claws and remove the auto high beam switch.