RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT RELAY


    1. A01XMJK

      Remove the 2 headlight relays from the engine room relay box.

    2. A01XGRJE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the headlight relay.

    3. Install the 2 headlight relays to the engine room relay box.

  2. INSPECT REAR FOG LIGHT RELAY


    1. A01XM8Z

      Remove the rear fog light relay from the engine room relay box.

    2. A01XFN3E01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the rear fog light relay.

    3. Install the rear fog light relay to the engine room relay box.

  3. INSPECT NO. 1 DAY TIME RUNNING LIGHT RELAY


    1. A01XIHQ

      Remove the No. 1 day time running light relay from the No. 3 engine room relay box.

    2. A01XFN3E01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the No. 1 day time running light relay.

    3. Install the No. 1 day time running light relay to the No. 3 engine room relay box.