REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT LED


    1. B001I75C01
      *a

      Component without harness connected

      (Rear Combination Light LED)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 2

      Negative (-) → 1

      		 Tail light illuminates

      Positive (+) → 3

      Negative (-) → 1

      		 Stop light illuminates
      If the result is not as specified, replace the rear combination light LED.