REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

    A01XHZAE12
    Text in Illustration
    *a

    Component without harness connected

    (Rear Combination Light Assembly LH)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (STP)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      Battery positive (+) → Terminal 2 (TL)

      Battery negative (-) → Terminal 4 (E)

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

    A01XHZAE12
    Text in Illustration
    *a

    Component without harness connected

    (Rear Combination Light Assembly RH)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (STP)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      Battery positive (+) → Terminal 2 (TL)

      Battery negative (-) → Terminal 4 (E)

      If the result is not as specified, replace the rear combination light assembly RH.