REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. B001EG9

      Turn the bulb socket counterclockwise until it stops to disconnect the bulb socket.

    2. B001DTT

      Remove the rear turn signal light bulb from the bulb socket.

  2. REMOVE BACK UP LIGHT BULB


    1. B001FQXC01
      *a Matchmark
      *b Unlock Position Mark

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B001EW6

      Remove the back up light bulb from the bulb socket.

  3. REMOVE UPPER REAR BUMPER RETAINER LH


    1. B001GMX

      Detach the 2 guides and remove the upper rear bumper retainer LH.

  4. REMOVE REAR COMBINATION LIGHT LED

    Tech Tips

    Use the same procedure to remove the rear combination light LED on the other side.


    1. B001HX8

      Disconnect the connector.

    2. Remove the screw.

    3. B001I73C01
      *a Matchmark
      *b Unlock Position Mark

      Turn the rear combination light LED counterclockwise until the matchmark is aligned with the unlock position mark to remove the rear combination light LED.

  5. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. B001D3H

      Detach the claw and disconnect the connector.

    2. Detach the 5 wire harness clamps and remove the rear combination light socket and wire sub-assembly LH.