REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE UPPER REAR BUMPER RETAINER LH


    1. B001GMX

      Detach the 2 guides and remove the upper rear bumper retainer LH.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01XIOV

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.

    2. A01XKCC

      Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly LH.

  3. REMOVE BACK UP LIGHT BULB

    A01XH3Z

    1. Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.

    2. A01XKMZ

      Remove the back up light bulb from the rear combination light socket and wire sub-assembly LH.

  4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. A01XDJ1

      Detach the 4 clamps.

    2. A01XKA7

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.

    3. A01XJGT

      Disconnect the connector and remove the rear combination light socket and wire sub-assembly LH.