FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH


    1. B001HEMC02
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 2(B)

      Negative (-) → 1(E)

      		 Illuminates
      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH


    1. B001HEMC02
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 2(B)

      Negative (-) → 1(E)

      		 Illuminates
      If the result is not as specified, replace the fog light assembly RH.