HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. B001H4UC01
      B001DEF Bracket

      Connect the 3 brackets to the seat of the screw to set the headlight assembly LH.

      Note

      Be careful not to break the bracket.

    2. Install the 3 screws and bolt.

      Torque:
      for Bolt
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. B001DT8

      Return the radiator side deflector LH to its original position and install the clip.

    4. B001HJMC01
      *a Connector Lock

      Connect the connector and lock the connector lock.

  2. INSTALL FRONT FENDER SIDE PANEL PROTECTOR LH


    1. Attach the 3 clips to install the front fender side panel protector LH.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. INSTALL RADIATOR GRILLE

    Click here

  5. INSTALL HEADLIGHT ORNAMENT GARNISH LH


    1. B001CDT

      Attach the 8 clips to install the headlight ornament garnish LH.

  6. INSTALL HEADLIGHT ORNAMENT GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  8. ADJUST HEADLIGHT AIMING

    Click here

  9. ADJUST FOG LIGHT AIMING

    Click here