HEADLIGHT ASSEMBLY(for LED Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE HEADLIGHT ORNAMENT GARNISH LH


    1. B001IHF

      Detach the 8 clips and remove the headlight ornament garnish LH.

  3. REMOVE HEADLIGHT ORNAMENT GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE RADIATOR GRILLE

    Click here

  5. REMOVE FRONT BUMPER COVER

    Click here

  6. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH

    B001E4Z

    1. Detach the 3 clips and remove the front fender side panel protector LH.

  7. REMOVE HEADLIGHT ASSEMBLY LH


    1. B001GJ8C01
      B001CE2 Protective Tape

      Apply protective tape as shown in the illustration.

    2. B001D3TC01
      *a Connector Lock

      Release the connector lock and disconnect the connector.

    3. B001FMO

      Remove the clip and open the radiator side deflector LH.

    4. B001DT6

      Remove the 3 screws and bolt.

    5. B001H4UC01
      B001DEF Bracket

      Disconnect the 3 brackets from the seat of the screw to remove the headlight assembly LH.

      Note

      Be careful not to break the bracket.