HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Connect each connector.

    3. Install the headlight assembly LH with the bolt and 3 screws.

      Torque:
      for Bolt
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }
      A01XDI6E01
      Text in Illustration
      *1 Protective Tape *2 Bolt
      *3 Screw - -

    4. Install the clip.

  2. INSTALL FRONT FENDER SIDE PANEL PROTECTOR LH


    1. Attach the 3 clips to install the front fender side panel protector LH.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here

  5. ADJUST FOG LIGHT AIMING

    Click here