REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01XDUDE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear combination light assembly LH.

    2. Connect the connector.

    3. Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the 4 clips to install the rear combination light assembly LH.

    4. Install the 2 bolts.

      A01XIU9E01
      Text in Illustration
      *A for LH Side *B for RH Side

  2. INSTALL REAR BUMPER COVER

    Click here