REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01XHX4

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

    3. Attach the 4 clamps to install the rear combination light socket and wire sub-assembly LH.

  2. INSTALL BACK UP LIGHT BULB


    1. A01XLIJ

      Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.

    2. A01XG2T

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A01XJ8G

      Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

    2. A01XKCQ

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

  4. INSTALL UPPER REAR BUMPER RETAINER LH


    1. Attach the 2 guides to install the upper rear bumper retainer LH.