REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 5 wire harness clamps to install the rear combination light socket and wire sub-assembly LH.

  2. INSTALL REAR COMBINATION LIGHT LED

    Tech Tips

    Use the same procedure to install the rear combination light LED on the other side.


    1. B001FKWC01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark

      Align the matchmark of the rear combination light LED with the unlock position mark, and then rotate the rear combination light LED clockwise until the lock position mark to install the rear combination light LED.

    2. Connect the connector.

  3. INSTALL UPPER REAR BUMPER RETAINER LH


    1. Attach the 2 guides to install the upper rear bumper retainer LH.

  4. INSTALL BACK UP LIGHT BULB


    1. Install the back up light bulb to the bulb socket.

    2. B001GRPC01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark

      Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

  5. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the bulb socket.

    2. B001CSF

      Insert and turn the bulb socket until it stops to connect it.