| DTC Code | DTC Name |
|---|---|
| B2450 | Initialization has not been Performed |
DESCRIPTION
The No. 1 headlight ECU sub-assembly LH stores this DTC if initialization has not been performed after the ECU was replaced.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Note |
|---|---|---|---|---|---|
| B2450 | Initialization has not been Performed | Initialization of the No. 1 headlight ECU sub-assembly LH has not been performed | No. 1 headlight ECU sub-assembly LH | No. 1 headlight ECU sub-assembly LH | w/o Air Suspension System |
CAUTION / NOTICE / HINT
Note
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.
PROCEDURE
PERFORM INITIALIZATION
Perform initialization of the No. 1 headlight ECU sub-assembly LH.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Turn the ignition switch to ON.
Check for DTCs.
| OK |
|---|
| DTC B2450 is not output. |
Tech Tips
If the No. 1 headlight ECU sub-assembly LH stores DTC B2450 even though the ECU has been initialized, the No. 1 headlight ECU sub-assembly LH may be malfunctioning.
| Result | |||
|---|---|---|---|
|
| OK |
|
END (INITIALIZATION WAS NOT COMPLETED) |
| NG |
|
REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH Click here |