LIGHTING SYSTEM(for LED Headlight) OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


    1. Turn the ignition switch to ON.

    2. Turn the light control switch to the Auto position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights turn on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights turn off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Driver Door-linked Auto Light Turn-off System)


    1. Close all of the doors.

    2. Turn the ignition switch to ON.

    3. Turn the taillights, low beam headlights, high beam headlights, front fog lights*1 and rear fog light*2 on.


      • *1: w/ Front Fog Light

      • *2: w/ Rear Fog Light

    4. Turn the ignition switch off.

    5. Open the driver door.

    6. Check that all of the lights go off immediately.


    • *1: w/ Front Fog Light

    • *2: w/ Rear Fog Light

    LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Driver Door-linked Auto Light Turn-off System)


    1. When the light control switch is in the tail or head position


      1. Turn the ignition switch to ON.

      2. Turn the low beam headlights, high beam headlights, or front fog lights*1 on.

      3. Turn the ignition switch off.

      4. Check that the low beam headlights, high beam headlights and front fog lights*1 go off immediately.

        Tech Tips

        The taillights and rear fog light*2 remain on.

    2. When the light control switch is in the Auto position


      1. Turn the ignition switch to ON.

      2. Turn the taillights, low beam headlights, high beam headlights, front fog lights*1 or rear fog light*2 on.

      3. Turn the ignition switch off.

      4. Check that all of the lights go off immediately.

  3. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/ Delay Function)


    1. When the taillights are on (low beam headlights are not on)


      1. Close all of the doors.

      2. Turn the ignition switch to ON.

      3. Turn the taillights on.

      4. Turn the ignition switch off.

      5. Open the driver door.

      6. Check that all of the lights turn off immediately.

    2. When the low beam headlights are on


      1. Close all of the doors.

      2. Turn the ignition switch to ON.

      3. Turn the low beam headlights on.

      4. Turn the ignition switch off.

      5. Open any of the doors.

      6. Close the door.

      7. Check that all of the lights turn off after 30 seconds (delay function).

        Tech Tips

        Before the lights turn off, if the lock button on the key is pushed after all of the doors are locked, all of the lights will turn off immediately.

  4. DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


    1. Turn the light control switch to the off or Auto position (with the taillights not turned on via the automatic light control system).

    2. Start the engine.

    3. Release the parking brake.

    4. Check that the daytime running lights come on.

  5. FOLLOW ME HOME SYSTEM OPERATION CHECK (w/ Follow Me Home System)

    Note

    This check is possible only when the "Follow Me Home Lighting Time" customize setting is set to "30 s" on the GTS. (The default setting is "30 s".)

    Click here


    1. Turn the ignition switch off.

    2. Turn the light control switch to the off or Auto position.

    3. Pull the light control switch to flash the headlights once.

    4. Check that the low beam headlights turns on for approximately 30 seconds.

  6. WELCOME LIGHT ILLUMINATION CONTROL OPERATION CHECK

    Note

    This check is possible only when the "Light up Clearance Lights at Door Unlock Function" customize setting is set to "ON" on the GTS. (The default setting is "ON".)

    Click here


    1. Turn the ignition switch off.

    2. Turn the light control switch to the Auto position.

    3. Cover the automatic light control sensor.

    4. Close and lock all doors.

    5. Unlock all doors by wireless door unlock or entry door unlock*.


      • *: w/ Entry and Start System

    6. Check that the taillights and clearance lights turn on for approximately 15 seconds.

  7. AUTOMATIC HIGH BEAM SYSTEM OPERATION CHECK (w/ Automatic High Beam System)


    1. B001ILDC01
      *a Automatic High Beam Indicator Light

      Check the operation of the automatic high beam indicator light.


      1. Turn the ignition switch to ON.

      2. Turn the light control switch to the Auto or head position.

      3. Turn the headlight dimmer switch to the high position.

      4. Turn the auto high beam switch on.

        Tech Tips

        If the auto high beam switch is turned on when the light control switch is not in the Auto or head position, or the headlight dimmer switch is not in the high position, "TO ACTIVATE AHB, SWITCH HEADLIGHTS TO HIGH BEAM" will be displayed on the multi-information display.

      5. Check that the automatic high beam indicator light turns on.

        Note

        When the forward recognition camera cannot correctly detect objects due to inclement weather such as thick fog or other visual obstructions, the automatic high beam indicator may not turn on and consequently the automatic high beam system may not operate.

    2. Check the operation of the automatic high beam function.


      1. At night, when driving the vehicle with the automatic high beam system in standby mode, check that the high beams automatically turn on after a short delay when all of the following conditions are met:


        • Vehicle speed is more than approximately 40 km/h (25 mph). (for European Models)

        • Vehicle speed is more than approximately 30 km/h (19 mph). (except European Models)

        • The area in front of the vehicle is dark.

        • There are no oncoming vehicles with headlights on.

        • There are no preceding vehicles with taillights on.

        • There are few streetlights along the street ahead.

      2. At night, when driving the vehicle with the high beams turned on by the automatic high beam system, check that the automatic high beam system turns off the high beams and returns to standby mode when any of the following conditions are met:


        • Vehicle speed is less than approximately 30 km/h (19 mph). (for European Models)

        • Vehicle speed is less than approximately 25 km/h (16 mph). (except European Models)

        • The level of ambient light is higher than a specified threshold.

        • There are oncoming vehicles with headlights on.

        • There are preceding vehicles with taillights on.

        • Light from streetlights ahead is higher than a specified threshold.