| DTC Code | DTC Name |
|---|---|
| B124B | Automatic High Beam System |
DESCRIPTION
The main body ECU (multiplex network body ECU) determines the status of the automatic high beam system based on the automatic high beam system signal from the forward recognition camera.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B124B | Automatic High Beam System | Malfunction in automatic high beam system |
|
WIRING DIAGRAM
| *1 | Forward Recognition Camera |
| *2 | Main Body ECU (Multiplex Network Body ECU) |
| *3 | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom
w/ Entry and Start System:
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.
Tech Tips
If the forward recognition camera stores a DTC for a malfunction of any of the following, this DTC will be stored simultaneously.
Speed sensor malfunction
Yaw rate sensor malfunction
Steering sensor malfunction
CAN communication system
PROCEDURE
CHECK FOR DTC (HEALTH CHECK)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: System Select / Health Check.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO OTHER DTC CHART |
| A |
|
CHECK FORWARD RECOGNITION CAMERA
Check if a dynamic radar cruise control system, lane departure alert system, road sign assist system and pre-collision system warning message are displayed on the combination meter assembly.
| OK |
|---|
| No dynamic radar cruise control system, road sign assist system, lane departure alert system and pre-collision system warning messages are displayed. |
| Result | |||
|---|---|---|---|
|
| OK |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| NG |
|
GO TO FORWARD RECOGNITION CAMERA SYSTEM Click here |