LIGHTING SYSTEM(for Halogen Headlight) PRECAUTION


  1. PRECAUTION FOR HEADLIGHT BULB REPLACEMENT


    1. Always prepare a new bulb for immediate replacement. While replacing a bulb, the lens may attract dust and moisture if removed from the vehicle for a long time.

    2. Always replace a bulb with another bulb of the same wattage.

    3. If only replacing the bulb on one side, differences in brightness and lighting color between the right and left sides may occur.

    4. Securely install the socket after bulb replacement. The lens may become cloudy or the light cavity may fill with water through gaps around the socket if the socket is not installed securely.

  2. HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA (w/ AUTOMATIC HIGH BEAM SYSTEM)


    1. The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Forward Recognition Camera System.

      Click here

  3. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START On (Start)