HEADLIGHT ASSEMBLY(for Halogen Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE HEADLIGHT ORNAMENT GARNISH LH


    1. B001IIK

      Detach the 4 clips and remove the headlight ornament garnish LH.

  3. REMOVE HEADLIGHT ORNAMENT GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE RADIATOR GRILLE

    Click here

  5. REMOVE FRONT BUMPER COVER

    Click here

  6. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH

    B001E4Z

    1. Detach the 3 clips and remove the front fender side panel protector LH.

  7. REMOVE HEADLIGHT ASSEMBLY LH


    1. B001HP3C01
      B001CE2 Protective Tape

      Apply protective tape as shown in the illustration.

    2. B001CV5

      Disconnect the 2 connectors.

    3. B001EL2

      Remove the clip and open the radiator side deflector LH.

    4. B001C8P

      Remove the 3 screws and bolt.

    5. B001HM8C01
      B001DEF Bracket

      Disconnect the 3 brackets from the seat of the screw to remove the headlight assembly LH.

      Note

      Be careful not to break the bracket.