HEADLIGHT CLEANER MOTOR INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the headlight cleaner washer motor and pump assembly connector.

      Tech Tips

      Make sure that the headlight cleaner washer motor and pump assembly is installed to the windshield washer jar assembly.

    2. Fill the windshield washer jar assembly with washer fluid.

    3. A01XLOBE05
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Cleaner Motor and Pump Assembly)

      Connect the positive (+) lead of the battery to terminal 2 of the headlight cleaner washer motor and pump assembly, and the negative (-) lead to terminal 1.

    4. Check that washer fluid flows from the windshield washer jar assembly.

      OK
      Washer fluid flows from the windshield washer jar assembly.

      If the result is not as specified, replace the headlight cleaner motor and pump assembly.