HEADLIGHT CLEANER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY

    A01XKWDE02
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Cleaner Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      5 - 8 Headlight cleaner switch on Below 1 Ω
      Headlight cleaner switch off 10 kΩ or higher

    2. Connect the positive (+) lead of the battery to terminal 7 (ILL+) and the negative (-) lead to terminal 6 (ILL-).

    3. Check that the headlight cleaner switch assembly illumination comes on.

      OK
      The headlight cleaner switch assembly illumination comes on.

      If the result is not as specified, replace the headlight cleaner switch assembly.