WASHER NOZZLE(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (w/ Heater Nozzle)


    1. B001I6JC01
      *a

      Component without harness connected

      (Washer nozzle sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 22 Ω

      If the result is not as specified, replace the Washer nozzle sub-assembly.