WASHER MOTOR(for Front Side) INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Install the windshield washer motor and pump assembly to the packing of the windshield washer jar assembly.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. Attach the guide to install the windshield washer jar assembly.

    2. B001CVFE03

      Install the 3 screws.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      Tighten the screws in the order shown in the illustration.

    3. w/o Headlight Cleaner System:

      Connect the connector.

    4. w/ Headlight Cleaner System:

      Connect the 3 connectors.

  3. INSTALL WASHER INLET SUB-ASSEMBLY


    1. Attach the claw to install the washer inlet sub-assembly.

  4. FILL WASHER JAR WITH WASHER FLUID


    1. Connect the washer hose to the hose of the windshield washer motor and pump assembly and fill the windshield washer jar assembly with washer fluid.

  5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. Install the front fender splash shield sub-assembly RH with 13 new grommets.

    2. Install the screw.

  6. INSTALL FRONT FENDER MUDGUARD RH


    1. Install the front fender mudguard RH with the 4 screws and 2 clips.

  7. INSTALL FRONT WHEEL

    Torque:
    112 N*m  { 1137 kgf*cm, 82 ft.*lbf }

  8. INSTALL FRONT BUMPER COVER

    Click here

  9. INSTALL RADIATOR GRILLE

    Click here

  10. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  11. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light)

    Click here

  12. INSPECT FOG LIGHT AIMING (w/ Fog Light)

    Click here

  13. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here