WASHER MOTOR(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the windshield washer motor and pump assembly connector.

      Tech Tips

      Make sure that the windshield washer motor and pump assembly is installed to the windshield washer jar assembly.

    2. Fill the windshield washer jar assembly with washer fluid.

    3. A01XGPA

      Connect the positive (+) lead of the battery to terminal 1 of the windshield washer motor and pump assembly, and the negative (-) lead to terminal 2.

    4. Check that washer fluid flows from the windshield washer jar assembly.

      OK
      Washer fluid flows from the windshield washer jar assembly.

      If the result is not as specified, replace the windshield washer motor and pump assembly.