WASHER MOTOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE RADIATOR GRILLE

    Click here

  3. REMOVE FRONT BUMPER COVER

    Click here

  4. REMOVE FRONT WHEEL

  5. REMOVE FRONT FENDER MUDGUARD RH


    1. B001DWJ

      Remove the 2 clips.

    2. Remove the 4 screws and front fender mudguard RH.

  6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. B001CEN

      Remove the screw.

    2. Remove the 13 grommets and front fender splash shield sub-assembly RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  7. DRAIN WASHER FLUID


    1. B001CGS

      Disconnect the washer hose from the hose of the windshield washer motor and pump assembly, and then drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  8. REMOVE WASHER INLET SUB-ASSEMBLY


    1. B001CPC

      Detach the claw and remove the washer inlet sub-assembly.

  9. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. B001HV4

      w/o Headlight Cleaner System:

      Disconnect the connector.

    2. B001I31

      w/ Headlight Cleaner System:

      Disconnect the 3 connectors.

    3. B001CVF

      Remove the 3 screws.

    4. B001I5R

      Detach the guide and remove the windshield washer jar assembly.

  10. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the connector.

    2. B001ED5

      Remove the windshield washer motor and pump assembly from the packing of the windshield washer jar assembly.