WIPER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch assembly.

    2. Connect the 2 connectors.

  2. INSTALL UPPER STEERING COLUMN COVER


    1. Attach the 4 clips and claw to install the upper steering column cover.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. Attach the 2 claws to install the lower steering column cover.

    2. for Power Tilt and Power Telescopic:


      1. Install the screw.

    3. Turn the steering wheel to the right and left as necessary to install the 2 screws.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here