WIPER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

      Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  2. REMOVE LOWER STEERING COLUMN COVER


    1. B001D0A

      Turn the steering wheel to the left as necessary to remove the screw.

    2. B001GWR

      Turn the steering wheel to the right as necessary to remove the screw.

    3. B001CWS

      for Power Tilt and Power Telescopic:


      1. Remove the screw.

    4. B001H2T

      Detach the 2 claws and remove the lower steering column cover.

  3. REMOVE UPPER STEERING COLUMN COVER


    1. B001DYN

      Detach the 4 clips and claw to remove the upper steering column cover.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B001IF0

      Disconnect the 2 connectors.

    2. Detach the claw and remove the windshield wiper switch assembly.