OUTER MIRROR SWITCH REMOVAL

PROCEDURE

1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH (for LHD)

   Click here

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

   Click here

3. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

   Click here

4. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

6. REMOVE INSTRUMENT SIDE PANEL LH (for LHD)

   Click here

7. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

   Click here

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

   Click here

10. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LHD)

    Click here

12. REMOVE OUTER MIRROR SWITCH ASSEMBLY

    
    
    1. 

       *A	w/ Automatic Retractable Mirror
       *B	w/o Automatic Retractable Mirror

       for LHD:

       
       

       1. w/ Automatic Retractable Mirror:

          Using a thin-bladed screw driver with its tipped wrapped with protective tape, detach the 4 claws from behind the lower instrument panel finish panel sub-assembly to remove the outer mirror switch assembly.

       2. w/o Automatic Retractable Mirror:

          Using a thin-bladed screw driver with its tipped wrapped with protective tape, detach the 2 claws from behind the lower instrument panel finish panel sub-assembly to remove the outer mirror switch assembly.

    2. 

       *A	w/o Entry and Start System
       *B	w/ Entry and Start System

       for RHD:

       Using a thin-bladed screw driver with its tipped wrapped with protective tape, detach the 5 claws from behind the instrument panel finish plate garnish to remove the outer mirror switch assembly.