FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 5 Door) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

      Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for RHD)


    1. for Manual Seat:

      Remove the front seat assembly.

      Click here

    2. for Power Seat:

      Remove the front seat assembly.

      Click here

  3. REMOVE CONSOLE BOX ASSEMBLY (for RHD)


    1. for Automatic Transmission:

      Remove the console box assembly.

      Click here

    2. for Manual Transmission:

      Remove the console box assembly.

      Click here

    3. w/ Refrigerated Cool Box:

      Remove the console box assembly.

      Click here

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. for Manual Seat Type:

      Click here

    2. for Power Seat Type:

      Click here

    3. for Face to Face Seat Type:

      Click here

  5. REMOVE REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)


    1. for 60/40 Split Slide Walk-in Seat Type LH Side:

      Click here

    2. for 60/40 Split Slide Walk-in Seat Type RH Side:

      Click here

  6. REMOVE REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat)


    1. for 60/40 Split Double-folding Seat Type LH Side:

      Click here

    2. for 60/40 Split Double-folding Seat Type RH Side:

      Click here

  7. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here

  8. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

    Click here

  9. REMOVE QUARTER SCUFF PLATE RH (for RHD, w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  11. REMOVE REAR DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  13. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  14. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

  15. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  16. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

  17. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  18. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  19. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  20. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  21. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  22. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  23. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

  24. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

  25. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  27. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  28. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  29. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  30. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. B001GNX

      Detach the 3 claws.

    2. Remove the fuel lid lock control cable assembly and fuel lid lock open lever sub-assembly.

  31. REMOVE FRONT FLOOR CARPET ASSEMBLY


    1. for LHD:


      1. B001H3G

        Detach the 6 clamps and fold back the front floor carpet assembly from the floor carpet hooks.

    2. for RHD:


      1. B001DI2

        Detach the 12 clamps and fold back the front floor carpet assembly from the floor carpet hooks.

  32. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. B001F80

      Turn the fuel lid lock control cable sub-assembly counterclockwise and remove the fuel lid lock control cable sub-assembly from the retainer.

    2. B001EU0

      Turn the lock retainer counterclockwise and remove the lock retainer.

    3. for LHD:


      1. Using a clip remover, detach the clamp labeled <A>.

        B001HOQN01

      2. Detach the 13 clamps and remove the fuel lid lock control cable sub-assembly.

    4. for RHD:


      1. Using a clip remover, detach the 3 clamps labeled <A>.

        B001EVJN01

      2. Detach the 14 clamps and remove the fuel lid lock control cable sub-assembly.