HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Pass the hood lock control cable assembly into the engine compartment.

    2. Pass the cable through the upper radiator support.

    3. Attach the clamps as shown in the illustration.

      A01XJ1HE01
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper

  2. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Pass the hood lock control cable assembly into the engine compartment.

    2. Pass the cable through the upper radiator support.

    3. Attach the clamps as shown in the illustration.

      A01XIH6E02
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. for LHD:


      1. B001FN8

        Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

      2. B001DDM

        Attach the 3 claws to install the hood lock control lever sub-assembly.

      3. A01XL38E05
        Text in Illustration
        *1 Protector
        *2 Fuel Lid Lock Control Cable
        *3 Hood Lock Control Cable
        *4 Clamp

        Attach the clamps as shown in the illustration.

    2. for RHD:


      1. B001FN8

        Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.

      2. B001CI2

        Attach the 3 claws and install the hood lock control lever sub-assembly.

  4. INSTALL HOOD LOCK ASSEMBLY (for LHD)


    1. A01XLZ7

      Apply MP grease to the sliding areas of the lock.

    2. A01XGEHE03
      Text in Illustration
      *A w/ Engine Hood Courtesy Switch

      Connect the hood lock control cable assembly.

    3. w/ Engine Hood Courtesy Switch:

      Connect the connector.

    4. A01XCB2

      Install the hood lock assembly with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  5. INSTALL HOOD LOCK ASSEMBLY (for RHD)


    1. A01XMDT

      Apply MP grease to the sliding areas of the lock.

    2. A01XLB1E02
      Text in Illustration
      *A w/ Engine Hood Courtesy Switch

      Connect the hood lock control cable assembly.

    3. w/ Engine Hood Courtesy Switch:

      Connect the connector.

    4. A01XL8C

      Install the hood lock assembly with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  6. INSTALL HOOD LOCK CONTROL CABLE COVER


    1. A01XI6DE03
      Text in Illustration
      *A for LHD
      *B for RHD

      Pass the hood lock control cable assembly through the hood lock control cable cover.

    2. Attach the claw to install the hood lock control cable cover.

    3. Install the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  7. INSTALL LOW PITCHED HORN ASSEMBLY (for LHD)

    Click here

  8. INSTALL HIGH PITCHED HORN ASSEMBLY (for LHD)

    Click here

  9. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR


    1. Attach the 2 claws and 2 guides to install the hood lock release lever protector.

  10. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  11. INSTALL RADIATOR GRILLE

    Click here

  12. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  13. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here