HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE RADIATOR GRILLE

    Click here

  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. A01XDCJ

      Detach the 2 clamps and 2 guides and remove the hood lock release lever protector.

  5. REMOVE LOW PITCHED HORN ASSEMBLY (for LHD)

    Click here

  6. REMOVE HIGH PITCHED HORN ASSEMBLY (for LHD)

    Click here

  7. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A01XI6DE03
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 2 screws.

    2. Detach the claw and remove the hood lock control cable cover.

  8. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. A01XCB2

      Remove the 3 bolts.

    2. w/ Engine Hood Courtesy Switch:


      1. A01XGEHE03
        Text in Illustration
        *A w/ Engine Hood Courtesy Switch

        Disconnect the connector.

    3. Disconnect the hood lock control cable and remove the hood lock assembly.

  9. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. A01XL8C

      Remove the 3 bolts.

    2. w/ Engine Hood Courtesy Switch:


      1. A01XLB1E02
        Text in Illustration
        *A w/ Engine Hood Courtesy Switch

        Disconnect the connector.

    3. Disconnect the hood lock control cable and remove the hood lock assembly.

  10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. for LHD:


      1. A01XL38E05
        Text in Illustration
        *1 Protector
        *2 Fuel Lid Lock Control Cable
        *3 Hood Lock Control Cable
        *4 Clamp

        Detach the clamp as shown in the illustration.

      2. B001DDM

        Detach the 3 claws.

      3. B001FN8

        Remove the hood lock control cable assembly and hood lock control lever sub-assembly.

    2. for RHD:


      1. B001CI2

        Detach the 3 claws.

      2. B001FN8

        Remove the hood lock control cable assembly and hood lock control lever sub-assembly.

  11. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, detach the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

      A01XJ1HE01
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper

  12. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, detach the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

      A01XIH6E02
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper
      *3 Rear Washer Hose - -