HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A through F are within each standard range.

      B001G91N01
      Standard
      Area Measurement Area Measurement
      A 5.45 to 8.45 mm (0.215 to 0.333 in.) B 6.55 to 9.55 mm (0.258 to 0.376 in.)
      C 2.0 to 5.0 mm (0.079 to 0.197 in.) D -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
      E 2.0 to 5.0 mm (0.079 to 0.197 in.) F -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)