SLIDING ROOF SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZING FUNCTION WITH GTS

   Tech Tips

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the GTS on.

   4. Enter the following menus: Utility / Customize Setting.

   5. Select the setting by referring to the table below.

      Slide Roof

      Display	Default	Contents	Setting
      Door Key Related Open*1	ON	The function to manually open the sliding roof linked with the power windows by holding the driver side door key for 2.0 seconds or more to the unlock position when the ignition switch is off.	ON or OFF
      Door Key Related Close*1	ON	The function to manually close the sliding roof linked with the power windows by holding the driver side door key for 2.0 seconds or more to the lock position when the ignition switch is off.	ON or OFF
      Wireless Key Related Open*2	ON	The function to manually open the sliding roof linked with the power windows by pressing the transmitter UNLOCK switch for 3.0 seconds or more when the ignition switch is off.	ON or OFF
      Wireless Key Related Close*2	ON	The function to manually close the sliding roof linked with the power windows by pressing the transmitter LOCK switch for 3.0 seconds or more when the ignition switch is off.	ON or OFF
      Door Key Related Operation	Slide	The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by holding the driver side door key for 2.0 seconds or more to the unlock position when the ignition switch is off.	Slide or Tilt
      Wireless Key Related Operation	Slide	The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by pressing on the transmitter UNLOCK switch for 3.0 seconds or more when the ignition switch is off.	Slide or Tilt
      Front SW Auto Operation	ON	This function is used to enable or disable auto operation.	ON or OFF

      Note

      
      

      • *1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.

      • *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.