WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. REPAIR DEFOGGER WIRE

    A01XFTVE01
    Text in Illustration
    *a Repair Point
    *b Masking Tape
    *c Broken Wire

    1. Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. Thoroughly mix the repair agent.

    4. A01XKMCE01
      Text in Illustration
      *a Fine Tip Brush
      *b Repair Point

      Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not allow electricity to flow in the defogger wire for at least 24 hours.