PROCEDURE
REMOVE REAR NO. 1 SPOILER COVER
REMOVE REAR SPOILER COVER RH
REMOVE REAR SPOILER SUB-ASSEMBLY
REMOVE REAR WIPER ARM
REMOVE REAR WIPER MOTOR ASSEMBLY
REMOVE BACK WINDOW STAY ASSEMBLY LH
REMOVE BACK WINDOW STAY ASSEMBLY RH
Tech Tips
Use the same procedures described for the LH side.
REMOVE BACK DOOR GLASS
Remove the connector and detach the 2 clamps.
Remove the 4 bolts and back window glass.
REMOVE BACK DOOR SEAL LH
Using a scraper, remove the back door seal LH.
Note
Be careful not to damage the back door glass.
Be sure to replace the seal with new ones.
REMOVE BACK DOOR SEAL RH
Use the same procedure described for the back door seal LH.
REMOVE BACK DOOR WINDOW PROTECTOR
Using a scraper, remove the back door window protector.
Note
Be careful not to damage the back door glass.
Be sure to replace the protector with new ones.
REMOVE BACK DOOR LOCK STRIKER COVER
Using a moulding remover, detach the 3 claws and remove the lock striker cover.
REMOVE BACK WINDOW LOCK STRIKER ASSEMBLY
Remove the 2 nuts and lock striker.
REMOVE BACK WINDOW GLASS SPACER
| *1 | No. 2 Back Window Glass Spacer |
| *2 | No. 1 Back Window Glass Spacer |
Tech Tips
Perform the following procedures if replacing the back window glass spacer.
Remove the back window glass spacer.
REMOVE BACK DOOR HINGE ASSEMBLY LH
Tech Tips
Perform the following procedures if replacing any back door hinge assembly LH.
Using a T30 "TORX" wrench, remove the 2 screws and back door hinge.
REMOVE BACK DOOR HINGE ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.