FRONT CONSOLE BOX(for Bench Seat Type) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

   Click here

2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click here

3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

   Click here

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

   Tech Tips

   Use the same procedure described for the No. 2 instrument panel finish panel cushion.

6. REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY

   
   

   1. 

      Detach the 10 clips.

   2. Disconnect each connector and remove the lower console panel sub-assembly.

7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   

   
   

   1. for LHD:

      
      

      1. Remove the screw.

      2. Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.

   2. 

      for RHD:

      
      

      1. Remove the screw.

      2. Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.

8. REMOVE CONSOLE BOX INSERT

   

   
   

   1. Detach the 2 clips and guide and remove the console box insert.

9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   
   

   1. Remove the screw.

   2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover sub-assembly.

      

      *A

      for LHD

      *B

      for RHD

10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    

    
    

    1. Detach the 2 clips and guide and remove the front No. 2 console box insert.

11. REMOVE UPPER CONSOLE PANEL

    

    
    

    1. Remove the 2 screws.

    2. Detach the 2 clips and remove the upper console panel.

    3. 

       Disconnect the connector and detach the clamp.

12. REMOVE REAR CONSOLE BOX ASSEMBLY

    

    
    

    1. Remove the 2 screws, 2 bolts and rear console box assembly.