FRONT CONSOLE BOX(for Manual Transmission) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR CONSOLE BOX ASSEMBLY


    1. Connect each connector.

    2. Install the rear console box assembly with the 2 screws, clip and 5 bolts.

  2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

    Click here

  4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

    Click here

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 8 clips and 2 claws to install the console panel sub-assembly.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    B001E5T

    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. INSTALL CONSOLE BOX INSERT

    Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  11. INSTALL LOWER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 10 clips to install the lower console panel sub-assembly.

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  14. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here