FRONT CONSOLE BOX(for Manual Transmission) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  6. REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY


    1. B001GKO

      Detach the 10 clips and remove the lower console panel sub-assembly.

    2. Disconnect each connector.

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. REMOVE CONSOLE BOX INSERT

    Click here

  9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    B001GU4

    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  12. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    B001I2SC01
    B001CE2 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  13. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

    Click here

  14. REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

    Click here

  15. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    Click here

  16. REMOVE REAR CONSOLE BOX ASSEMBLY

    B001GHJ

    1. Remove the 2 screws, clip and 5 bolts.

    2. Disconnect each connector and remove the rear console box.