VOLTAGE INVERTER(for 3 Door) INSTALLATION

PROCEDURE

1. INSTALL VOLTAGE INVERTER ASSEMBLY

   
   

   1. Install the voltage inverter with the 2 bolts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

3. INSTALL OUTER LAP BELT ANCHOR COVER

   Click here

4. INSTALL QUARTER TRIM POCKET TRAY

   Click here

5. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

   Click here

6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

8. INSTALL REAR FLOOR CARPET ASSEMBLY

   Click here

9. INSTALL QUARTER TRIM COVER HOLE RH

   Click here

10. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

11. INSTALL MAT SET PLATE COVER

    Click here

12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

14. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Click here