VOLTAGE INVERTER(for 3 Door) REMOVAL

PROCEDURE

1. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

   Click here

2. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

4. REMOVE MAT SET PLATE COVER

   Click here

5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

6. REMOVE QUARTER TRIM COVER HOLE RH

   Click here

7. REMOVE REAR FLOOR CARPET ASSEMBLY

   Click here

8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

9. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

   Click here

10. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

11. REMOVE QUARTER TRIM POCKET TRAY

    Click here

12. REMOVE OUTER LAP BELT ANCHOR COVER

    Click here

13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

14. REMOVE VOLTAGE INVERTER ASSEMBLY

    
    

    1. 

       Disconnect the connector.

    2. Remove the 2 bolts and voltage inverter.